DESK GUIDE / Cable organization
Floor cable management, steps 3 starting with power strip
I tied the cables, but do I have to untie them again every time I clean? power strip If you first decide on the position and the path through which the line will pass, you will have a standard for organizing it. Follow the three steps to check power location, spare length, and movement.
The space, furniture, and product details of the expanded area may differ from the actual appearance, so please look at it as a layout idea.
Decide where to place power strip and what device to connect it to.
First, write down which devices are connected and look at the path from the outlet to your desk. It is easy to compare locations by checking where your feet or chair wheels pass and where your hands must reach when cleaning. power strip moving up doesn't have to be the same answer on all desks.
If you use a tray or fixed holder, please compare the size of power strip with the installation instructions and conditions for fixing it to the desk. You should also leave space for access to switches and plugs. Avoid hanging it on a wire or fixing it loosely, and check the rating and usage instructions for the product.
Direct and loosely gather your way from the device towards the power source.
Start by connecting devices that are intended to be used, such as monitors, lights, and laptops. After determining the path so that the line does not cross the front of desktop or the range where the foot moves, you can organize the remaining length. It's okay if you don't hide it by pulling it tight to the required line.
When fixing the cable, check the bending and usage conditions recommended by the product. You can also split it into smaller bundles to make it easier to reconnect or move the equipment. Conditions for wrapping the power cable may vary depending on the product, so do not uniformly wrap all remaining cables tightly.
